Bathroom Pedestal Sink Installation Instructions

1. Laying the sink on the column, moving it to make it contacting with the column anastomosis, and then moving the whole pedestal sink carefully to the appropriate the installation location.

2. Putting the level instrument on the sink, to correct the whole sink’s horizontal, if necessary, could moving the whole pedestal sink in horizontal direction..

3. Checking the water outlet of the basin whether it is corresponding to the water outlet of the wall, if necessary, could move the whole bathroom pedestal sink. Note: after moving the whole pedestal sink, the horizontal of the whole pedestal sink should be corrected once again.

4. Marking the installation hole position of the sink and the column on the wall and the ground.

5. Removing the sink and the column away carefully.

6. Marking holes in the wall and floor with the screw sizes. Note: the diameter and depth of the hole should be enough to install the screw.

7. Plugging the expansion particles, to fixing the screw rod on the walls and the ground. Screw on the ground should expose about 25mm. The screw on the wall should expose about 34mm. (PLS002 screw or 45mm PLS003 screw).

8. Fixing faucet and drain assembly.

9. Fixing the column on the ground.

If you would like to know more or communicate with us, please visit our website at: http://www.solidsurface-countertops.com/